YMS TOUCH The "TAMMY" Tracer-integrated Front Slide (For Novritsch SSP5)

※ This product is only suitable for airsoft/toy guns.

This is a product designed, produced, distributed and sold by YMS.

Being on the frontlines of sales and close to our customers has allowed us to better understand customer needs and actual usage scenarios.
In the past, attaching a tracer unit required using an adapter to fix it to the front of the outer barrel, limiting the aesthetics and making it difficult to find suitable holsters.
However, using tracer BBs for night battles remains an irresistible experience for many, offering convenience in aiming and enhancing entertainment value.
Taking these factors into account, we launched the "TAMMY" Tracer-integrated Slide Series.

More TAMMY slides will be available in the future.

Specifications
Length: 174mm (7mm longer than the original SSP5 6.0" Front Slide)
Weight: 142g (including the cover and tracer unit)
Material: CNC Precisely-machined 6061 Aluminum Alloy

Battery capacity: 600mAh (2 x 300mAh lithium batteries)
Interface: Type-C
Safety feature: Power-saving mechanism that shuts down after 20 minutes of no movement/no operation
(A single flash occurs upon shutdown. It is a notification instead of malfunction)

Operation Instructions
Long Press: Power Off
Short Press: Power On/Switch Modes

Contents
Tracer-integrated Front Slide Body (Pre-installed) x1
Front Slide Cover x1
Minor Adjustment Shims x2 (use as needed depending on the actual situation)
Screws x5 (pre-installed)

Purchase Notes
If you are using the 6.0-inch version of the SSP5, you need to:
Replace the inner barrel -> change to 112mm or shorter (i.e., use the 5.1-inch or 4.3-inch version)
Replace the recoil spring guide rod assembly -> change to the 5.1-inch or 4.3-inch version.

*If you are using the 5.1-inch or 4.3-inch version of the SSP5, no additional changes are required; you can use the original parts directly for installation.

Installation:
1. Remove the original front and rear slide assembly.
2. Separate the rear slide, then remove the recoil spring guide rod assembly.
3. Remove the HOP-UP unit + Inner Barrel, TDC Adjustment Screw, HOP-UP Unit Fixing Screw, and the Slide Bottom Piece from the original front slide (keep them in a box to avoid loss).
4. Remove the original outer barrel and the inner barrel fixing O-ring (Please preserve them).

*Except for the lower front slide block, use all the original screws.

5. Install the HOP-UP unit + Inner Barrel into the Tracer-integrated Slide, then reattach the HOP-UP Unit Fixing Screw and TDC Adjustment Screw.
6. Reassemble the recoil spring guide rod assembly, then reattach the original rear slide.
7. Attach the whole slide assembly to the SSP5, then reattch the Slide Bottom Piece.
8. Manually pull the rear slide to ensure smooth operation.

9. Attach the front slide cover or install the NOVRITSCH Premium Red Dot Plate / NOVRITSCH Front Slide Cover / YMS RMR/DOC Red Dot Plate.

10. Press the power button at the front to activate the tracer unit.

Precaution
1. Do not remove the tracer unit unless necessary. If you disassemble it yourself and cause damage,
repair costs start at 450 NTD per repair (shipping costs are additional) (Taiwan Only)
2.Avoid completely draining the battery or leaving it fully charged without use for long periods.
Regular use and maintaining a charged state will keep the battery healthy, as otherwise, it may lead to battery damage.
3. NOVRITSCH SSP5 Toprail/PPicatinny Plate (Long/Short) is not applicable.