Hypertek HT-MWS-01 3DP 超輕量槍機與緩衝器套件（Marui規格 MWS GBBR）

【商品介紹】

Hypertek HT-MWS-01 3DP Bolt & Buffer Kit 是針對東京丸井規格 M4 MWS GBBR（ZET System）所設計的競技級內部升級套件，主要開發方向為提升作動循環速度、改善瓦斯效率並降低後座位移。

槍機本體採精密工業級 3D 列印製程，淨重僅 21g，完整組裝後重量為 47g。相較於約 220g 以上的原廠金屬槍機，大幅降低前後運動時的機械慣性，使槍機能以更快的速度完成往復作動。

重新設計的氣體導流結構可在 Blowback 行程中更早切斷供應至飛機座的瓦斯，藉此降低單次擊發的瓦斯消耗，並減少持續快速射擊時彈匣降溫與結霜的可能性。

套件採用 Captured Buffer 結構，讓緩衝系統保持固定並對正於托桿內部。整合式雙階段彈簧系統可緩衝槍機行程末端的向後撞擊，降低傳遞至槍身的震動與後座位移。

彈簧導桿可搭配標準 Hi-Capa 規格覆進簧，玩家可透過更換不同規格的彈簧，調整槍機循環速度、復進速度及適用的瓦斯工作壓力。

【Product Description】

The Hypertek HT-MWS-01 3DP Bolt & Buffer Kit is a competitive-grade internal upgrade engineered specifically for Tokyo Marui-spec M4 MWS GBBR platforms featuring the ZET System. Its primary design goals are maximum cycle speed, improved gas efficiency and minimal recoil movement.

Manufactured through precision industrial 3D printing, the ultra-lightweight bolt carrier weighs only 21g, while the complete assembled system weighs 47g. Compared with an original metal bolt carrier weighing approximately 220g or more, the significant reduction in reciprocating mass greatly reduces mechanical inertia and enables extremely fast cycling.

The redesigned early air-cut geometry shuts off the gas supply to the nozzle earlier during the blowback stroke. This reduces gas consumption per shot and helps minimise magazine cool-down and freeze-up during sustained rapid fire.

The captured buffer assembly keeps the recoil system contained and properly aligned inside the buffer tube. Its integrated two-stage spring system dampens the final rearward impact of the bolt carrier, reducing vibration transmitted to the receiver and helping the rifle remain stable on target.

The spring guide shaft accepts standard Hi-Capa-spec recoil springs, allowing users to fine-tune cycle speed, return rate and operating gas pressure by changing the installed spring.

 
【商品規格】

品牌：Hypertek
產品型號：HT-MWS-01
產品名稱：3DP Bolt & Buffer Kit
製造方式：精密工業級 3D 列印
適用系統：東京丸井規格 M4 MWS GBBR（ZET System）
槍機本體淨重：21g
完整組裝重量：47g
彈簧規格：標準 Hi-Capa 規格覆進簧
主要設計方向：提升作動循環速度、改善瓦斯效率、降低後座位移
結構特色：提前斷氣導流、Captured Buffer、雙階段彈簧系統

【Specifications】

Brand: Hypertek
Model: HT-MWS-01
Product: 3DP Bolt & Buffer Kit
Manufacturing Process: Precision Industrial 3D Printing
Compatibility: Tokyo Marui-spec M4 MWS GBBR Series with ZET System
Bolt Carrier Net Weight: 21g
Complete Assembly Weight: 47g
Spring Standard: Standard Hi-Capa-spec Recoil Spring
Primary Design Goals: Maximum Cycle Speed, Improved Gas Efficiency and Minimal Recoil Movement
Mechanical Features: Early Air-Cut Geometry, Captured Buffer and Two-Stage Spring System

【包裝內容】

3DP 超輕量槍機本體 ×1
Captured Buffer 緩衝器與彈簧總成 ×1
黑色緩衝墊圈 ×2
橘色調整墊圈 ×1
黑色調整墊片 ×4

※包裝內容依原廠商品圖片整理，實際內容請以到貨商品為準。

【Package Contents】

3DP Ultra-Lightweight Bolt Carrier ×1
Captured Buffer and Spring Assembly ×1
Black Buffer Spacers ×2
Orange Adjustment Spacer ×1
Black Adjustment Shims ×4

Package contents are identified from the manufacturer’s product images. Actual contents may vary.

【相容平台】

東京丸井規格 M4 MWS GBBR 系列
東京丸井 MWS ZET System 平台

※彈簧導桿相容標準 Hi-Capa 規格覆進簧。
 
 

 

 

🔧 Hypertech 系列滑套｜保固與使用說明

✅ 產品耐用度說明
🛡 原廠瑕疵保固
Hypertech 原廠承諾：
若產品於正常使用下出現產品本身製造瑕疵，將提供一對一更換服務。

⚠ 不在保固範圍的情況
常見損壞原因多為跌落、撞擊等外力造成，此類人為或使用不當所導致之損壞，
不在保固範圍內，請使用者特別留意。

📅 保固期限與條件
保固期限：自消費者購買當日起算 90 天
保固條件：

非人為損壞
經確認屬可保固之狀況
保固內容：Hypertech 將提供對應之替換零部件
運費說明：零部件寄送之郵資需由使用者自行負擔