商品貨號:G100
商品摘要
預購提示
NT$ 1470

Eshooter Ember 11.1V 1000mAh 25C USB-C 智慧鋰電池
預購提示
NT$ 1470
【中文】
Eshooter Ember Smart Battery
11.1V 1000mAh 25C USB-C 智慧 LiPo 鋰電池
Ember 是 Eshooter 為 Airsoft AEG 電動槍開發的智慧型 LiPo 電池,將電芯管理、充電與多項保護功能直接整合於電池本體。
不同於傳統 LiPo 電池需要另外連接平衡充電器,Ember 可直接透過 USB-C PD 進行充電,並採用 CNC 加工鋁合金一體式外殼與整合式無外露線材設計,讓整體配置更加簡潔。
【商品特色】
■ 11.1V/1000mAh/25C
採用 3S1P 配置,額定電壓 11.1V、容量 1000mAh,額定能量 11.1Wh,適用於原本設計使用 11.1V 電池的 AEG 電動槍。
25C 放電規格可提供標準以及高速 AEG 配置所需的放電能力。
■ 不需要傳統平衡充電器
電芯管理系統整合於電池本體內,不需要額外的 Balance Board、充電座或傳統平衡充電器。
■ USB-C PD 30W 充電
支援 USB-C PD 3.0 輸入,最高 30W。
官方標示支援五種 PD 充電 Profile,可搭配相容的手機充電器、行動電源或車用充電器使用。
■ CNC 鋁合金一體式外殼
採用 CNC 加工 Aluminium Unibody 一體式鋁合金外殼。
沒有傳統兩片式卡扣接縫,也不使用一般 LiPo 常見的熱縮膜外包覆結構。
■ 整合式無外露線材設計
電池本體採整合式結構,沒有外露電源線與外露焊點,可減少線材在槍身內勾掛或卡住的情況。
■ 多重電路保護
內建保護電路,可自動提供:
・過充保護
・過放保護
・短路保護
・充電溫度保護
・放電溫度保護
■ 充放電溫度保護
充電過低溫:
0±4°C 時停止充電
5±4°C 時恢復
充電過高溫:
50±3°C 時停止充電
45±3°C 時恢復
放電過低溫:
-25±4°C 時停止輸出
-20±4°C 時恢復
放電過高溫:
70±3°C 時停止輸出
60±3°C 時恢復
■ T-Plug 輸出
採用 T-Plug/Deans Style 輸出接頭。
接點使用鍍金銅合金材質。
官方並標示接頭材質達 UL94 V-0 阻燃等級,工作溫度範圍為 -20°C~120°C。
■ LED 狀態指示
紅燈:
充電中/低電量
綠燈:
充電完成
紅燈+綠燈:
錯誤狀態
【商品規格】
品牌:Eshooter
系列:Ember Smart Battery
電池類型:LiPo
配置:3S1P
電壓:11.1V
容量:1000mAh
額定能量:11.1Wh
放電倍率:25C
充電介面:USB-C
充電規格:PD 3.0
最大充電功率:30W
輸出接頭:T-Plug/Deans Style
尺寸:
145 × 22 × 17 mm
重量:
約 95 g
外殼:
CNC 加工鋁合金一體式外殼
【相容性】
適用於原廠設計使用 11.1V 電池,並採用 T-Plug/Deans 接頭的 AEG 電動槍。
購買前請先確認槍身電池空間。
電池實際尺寸為:
145 × 22 × 17 mm
【使用說明】
本產品充電管理功能已整合於電池本體,可直接透過相容的 USB-C PD 電源進行充電,不需要另外使用傳統 LiPo 平衡充電器。
【注意事項】
購買前請務必確認您的電動槍:
1. 支援 11.1V LiPo 電池
2. 使用 T-Plug/Deans 接頭
3. 電池空間可容納 145 × 22 × 17 mm 電池本體
請依照原廠規範使用與充電鋰聚合物電池。
--------------------------------
【English】
Eshooter Ember Smart Battery
11.1V 1000mAh 25C LiPo with USB-C 30W
The Ember is a smart LiPo battery designed for airsoft AEGs, integrating cell management, charging and multiple protection functions directly into the battery body.
Unlike conventional LiPo packs that require a separate balance charger, Ember supports direct USB-C PD charging and features a CNC-milled aluminium unibody with an integrated wire-free construction.
【Features】
■ 11.1V / 1000mAh / 25C
3S1P configuration with an 11.1V nominal voltage, 1000mAh capacity and 11.1Wh rated energy.
Designed for AEGs rated for 11.1V batteries.
25C discharge provides headroom for standard and high-speed AEG builds.
■ No Balance Charger Required
Cell management is sealed inside the battery body.
No separate balance board, cradle or conventional balance charger is required.
■ USB-C PD 30W Charging
Supports USB-C PD 3.0 input with up to 30W charging.
Five PD profiles are supported.
Compatible power sources include suitable phone chargers, power banks and car chargers.
■ CNC Aluminium Unibody
One-piece CNC-milled aluminium body with no snap-fit halves or conventional shrink-wrap exterior.
■ Wire-Free Integrated Construction
No external power leads or exposed solder joints, reducing wires that could snag inside the battery compartment.
■ Integrated Protection
Automatic protection includes:
・Over-charge protection
・Over-discharge protection
・Short-circuit protection
・Charging temperature protection
・Discharging temperature protection
■ Temperature Protection
Charging too cold:
Locks at 0±4°C
Releases at 5±4°C
Charging too hot:
Stops at 50±3°C
Releases at 45±3°C
Discharging too cold:
Stops output at -25±4°C
Returns at -20±4°C
Discharging too hot:
Cuts output at 70±3°C
Returns at 60±3°C
■ T-Plug Output
Deans-style T-Plug connector with gold-plated copper alloy contacts.
Connector material is rated UL94 V-0 flame retardant with an operating range of -20°C to 120°C.
■ Status LED
Red:
Charging / low battery
Green:
Fully charged
Red + Green:
Error
【Specifications】
Brand: Eshooter
Series: Ember Smart Battery
Battery Type: LiPo
Configuration: 3S1P
Voltage: 11.1V
Capacity: 1000mAh
Rated Energy: 11.1Wh
Discharge Rate: 25C
Charging Interface: USB-C
Charging Standard: PD 3.0
Maximum Charging Power: 30W
Output Connector:
T-Plug / Deans Style
Dimensions:
145 × 22 × 17 mm
Weight:
Approx. 95 g
Body:
CNC-milled aluminium unibody
【Compatibility】
For AEGs designed for 11.1V batteries and equipped with a T-Plug / Deans connector.
Check the available battery compartment space before purchase.
Battery dimensions:
145 × 22 × 17 mm
【Instructions】
Charging management is integrated into the battery body.
The battery can be charged directly from a compatible USB-C PD power source without a conventional LiPo balance charger.
【Notes】
Before purchase, verify that your AEG:
1. Supports an 11.1V LiPo battery
2. Uses a T-Plug / Deans connector
3. Has sufficient space for a 145 × 22 × 17 mm battery
Always operate and charge LiPo batteries according to the manufacturer's instructions.