Hypertek 3D列印 Hi-Capa 滑套專用活塞頭 Piston Head HT-HC-004

【中文】

Hypertek Piston Head for 3D Printed Hi-Capa Slide 是專為 Hypertek 輕量化 3D 列印 Hi-Capa 滑套開發的活塞頭（Piston Head）。

本產品針對輕量化競技滑套的作動需求設計，著重於氣密表現與降低往復運動重量。透過改善氣密效率及減少作動負擔，有助於提升滑套循環速度與瓦斯使用效率，適合重視快速作動的 Hi-Capa 競技改裝配置。

【商品特色】

■ Hypertek 3D 列印滑套專用設計
針對 Hypertek 輕量化 3D 列印 Hi-Capa 滑套開發，配合此系列滑套的作動需求。

■ 優化氣密表現
以改善氣密效率為設計重點，有助於降低氣體洩漏造成的能量損失，提升瓦斯作動系統的使用效率。

■ 降低往復運動重量
以低往復重量為設計方向，減少滑套作動系統的運動負擔。

■ 提升滑套循環速度
透過氣密與輕量化設計，有助於加快滑套循環反應，適合追求快速作動的競技射擊配置。

■ 提升瓦斯使用效率
配合 Hypertek 輕量化滑套系統，有助於提高瓦斯能源的使用效率。

【商品規格】

品牌：Hypertek
商品名稱：Piston Head for 3D Printed Hi-Capa Slide
原廠料號：HT-HC-004
商品類型：GBB 活塞頭（Piston Head）
適用系統：Hypertek 3D 列印 Hi-Capa 滑套系統
主要用途：改善氣密與優化滑套作動效率

【相容性】

主要針對：
・Hypertek 3D Printed Hi-Capa Slides
・Hypertek 輕量化 3D 列印 Hi-Capa 滑套系統

注意：
商品資料未明確列出適用的全部滑套型號、世代與 Blowback Housing 規格。

其他品牌滑套或 Blowback Unit 的適配性，請於購買前確認。

【使用說明】

本產品為 Hi-Capa GBB 滑套作動系統使用的活塞頭，需配合適用的 Blowback Housing 與相關氣動零件組裝。

安裝前應確認使用的滑套、Blowback Housing 及 Nozzle 規格是否相容。

【注意事項】

1. 本商品為 GBB 手槍改裝用活塞頭，並非完整 Blowback Unit。

2. 本產品主要針對 Hypertek 3D 列印 Hi-Capa 滑套設計，並未宣稱適用所有品牌的 Hi-Capa 滑套。

3. 不同品牌的 Blowback Housing、Nozzle 與活塞頭可能存在尺寸及公差差異，購買前請確認相容性。

4. 原商品頁未提供材質、重量、尺寸及氣密零件的詳細規格，請勿直接視為與其他品牌活塞頭通用。

5. 實際作動表現仍可能受到滑套、氣動組件、瓦斯及整體組裝配置影響。

────────────────────

【English】

Hypertek Piston Head for 3D Printed Hi-Capa Slide is a dedicated piston head engineered for Hypertek's lightweight 3D-printed Hi-Capa slide systems.

Designed with competitive airsoft performance in mind, this piston head focuses on optimizing air sealing and reducing reciprocating mass.

Its performance-oriented design helps achieve faster slide cycling and improved gas efficiency when used with compatible Hypertek slide components.

【Features】

■ Designed for Hypertek 3D-Printed Slides
Engineered specifically for Hypertek's lightweight 3D-printed Hi-Capa slide systems.

■ Optimized Air Seal
Designed to improve air sealing performance and reduce energy loss within the gas blowback system.

■ Reduced Reciprocating Mass
Focuses on minimizing reciprocating mass to support lightweight slide operation.

■ Faster Slide Cycling
Optimized sealing and reduced moving mass help support faster slide cycling in competition-oriented Hi-Capa builds.

■ Improved Gas Efficiency
Designed to maximize gas efficiency within compatible lightweight gas blowback configurations.

【Specifications】

Brand: Hypertek
Product: Piston Head for 3D Printed Hi-Capa Slide
SKU: HT-HC-004
Product Type: GBB Piston Head
Intended Platform: Hypertek 3D-Printed Hi-Capa Slide System
Primary Function: Air Seal Optimization and Reduced Reciprocating Mass

【Compatibility】

Designed for:
・Hypertek 3D-Printed Hi-Capa Slides
・Hypertek Lightweight Hi-Capa Slide Systems

Note:
The product description does not specify a complete compatibility list for individual slide models, generations, or blowback housing versions.

Compatibility with other aftermarket slides or blowback units should be verified before purchase.

【Installation】

This piston head is intended for use as part of a compatible Hi-Capa gas blowback system.

Verify compatibility with the selected slide, blowback housing, and nozzle before installation.

【Notes】

1. This product is a replacement or upgrade piston head, not a complete blowback unit.

2. It is developed for Hypertek 3D-printed Hi-Capa slides. Universal compatibility with other brands is not specified.

3. Dimensional and tolerance differences may exist between aftermarket blowback components.

4. Material, weight, and detailed dimensions are not specified in the available product description.

5. Actual performance depends on the complete gas blowback configuration and component compatibility.